Ordering this product
Check the full part number and required version against your equipment. Add any electrical or connection requirements when contacting us.
Product information
SIPLUS ET 200SP CP 1542SP-1 IRC (Part number 6AG2542-6VX00-4XE0) is a rail-based communication module based on 6GK7542-6VX00-0XE0 with conformal coating for SIMATIC S7-ET 200SP connectivity over Industrial Ethernet.
Detailed Parameters
Based on:6GK7542-6VX00-0XE0
Mounting:rail based
Conformal coating:yes
Ambient temperature:-40…+70 °C
OT4:yes
ST1/2:(+85 °C for 10 minutes)
Connection target:SIMATIC S7-ET 200SP to Industrial Ethernet
SINAUT ST7:supported
TeleControl Server Basic:supported
IEC 60870-5-104:supported
DNP3 protocol:supported
Open IE communication:TCP/IP, ISO-on-TCP, UDP
IP broadcast/multicast:supported
SNMPV1:supported
DHCP:supported
Secure email:supported
IP addressing:IPv4/IPv6
SINEMA Remote Connect:supported
Engineering Context
SIPLUS ET 200SP CP 1542SP-1 IRC is designed as a rail-based interface for connecting a SIMATIC S7-ET 200SP to Industrial Ethernet.
The module supports IEC-60870-5-104 or DNP3 protocol communication to a control center.
Open IE communication is supported using TCP/IP, ISO-on-TCP, and UDP, with IP broadcast/multicast support.
FAQ
1. What is the product designation for part number 6AG2542-6VX00-4XE0?
SIPLUS ET 200SP CP 1542SP-1 IRC.
2. What is the basis of the CP 1542SP-1 IRC for part number 6AG2542-6VX00-4XE0?
It is based on 6GK7542-6VX00-0XE0.
3. What temperature range is specified for the product?
The specified ambient temperature range is -40…+70 °C, with ST1/2 rated for (+85 °C for 10 minutes) and OT4 indicated as applicable.
4. Which protocols are supported to a control center?
IEC-60870-5-104 or DNP3 protocol communication is supported.
5. Which open Industrial Ethernet protocols are supported?
TCP/IP, ISO-on-TCP, and UDP are supported for open IE communication.
6. Is secure email and SNMPV1 supported?
Yes—secure email and SNMPV1 are supported.
