Ordering this product
Check the full part number and required version against your equipment. Add any electrical or connection requirements when contacting us.
Product information
SIMATIC DP, ET 200eco PN, with part number 6ES7146-6FF00-0AB0, provides F-DI 8×24 V and F-DQ 3×24 V 2 A using a M12 PROFIsafe design and includes an eCoding plug-in connector.
Detailed Parameters
System family:SIMATIC DP
Remote terminal:ET 200eco PN
Module type:F-DI 8×24 V / F-DQ 3×24 V 2 A
Connector type:M12 PROFIsafe
Safety level (ISO 13849):up to PL e
Safety integrity level (IEC 61508):up to SIL 3
Degree of protection:IP65/67
Included accessory:including eCoding plug-in connector
Engineering Context
The SIMATIC DP ET 200eco PN module provides a mixed F-DI and F-DQ configuration with defined channel counts.
The design uses a M12 PROFIsafe interface and supports safety concepts up to PL e (ISO 13849) and up to SIL 3 (IEC 61508).
The specified degree of protection for the module is IP65/67.
FAQ
1. What signal configuration does 6ES7146-6FF00-0AB0 provide?
It provides F-DI 8×24 V and F-DQ 3×24 V 2 A.
2. What connector type is used on 6ES7146-6FF00-0AB0?
It uses a M12 PROFIsafe connector.
3. Which safety levels are specified for 6ES7146-6FF00-0AB0?
It is specified for up to PL e (ISO 13849) and up to SIL 3 (IEC 61508).
4. What is the degree of protection of 6ES7146-6FF00-0AB0?
The degree of protection is IP65/67.
5. Is an eCoding plug-in connector included with 6ES7146-6FF00-0AB0?
Yes, it includes an eCoding plug-in connector.
