SIMATIC ET 200eco PN DI 16x 24 V DC (part number 6ES7141-6BH00-0BB0) provides sink input functionality (PNP, sinking input) with configurable input delay and channel diagnostics for specific input and encoder power supply conditions.
Detailed Parameters
Module name:SIMATIC ET 200eco PN
Signal type:DI 16x 24 V DC
Input connector:M12-L
Number of M12 interfaces:8x M12
Assignment:double assignment
Input type:input type 3 (IEC 61131)
Input type detail:sink input (PNP, sinking input)
Input delay:0.05..20 ms
Channel diagnostics:wire break at input; encoder power supply short-circuit
Isochronous mode:0.25 ms
Startup mode:prioritized startup
Mode:MSI
Mode:MRP
Redundancy:S2 redundancy
I&M:I&M0…3
Fieldbus:multi-fieldbus
Supported protocol:PN IO
Supported protocol (fieldbus/network):Ethernet IP
Supported protocol (fieldbus/network):Modbus TCP
Degree of protection:IP67 / IP69K
Engineering Context
The module 6ES7141-6BH00-0BB0 is a SIMATIC ET 200eco PN DI 16x 24 V DC sink input device with input type 3 (IEC 61131).
Channel diagnostics include wire break at input and encoder power supply short-circuit, supporting monitoring at the input channel level.
The module supports multi-fieldbus operation with PN IO and Ethernet IP, and it also supports Modbus TCP.
FAQ
1. What is the input type and signal characteristic of 6ES7141-6BH00-0BB0?
It is an input type 3 (IEC 61131) sink input (PNP, sinking input) module.
2. What input delay range does 6ES7141-6BH00-0BB0 support?
The input delay is 0.05..20 ms.
3. Which channel diagnostics are available on 6ES7141-6BH00-0BB0?
Diagnostics for wire break at input and encoder power supply short-circuit are included.
4. What redundancy and timing modes are listed for this module?
It lists prioritized startup, isochronous mode 0.25 ms, MSI, MRP, and S2 redundancy.
5. Which protocols are explicitly stated for this module?
The module is stated to support PN IO, Ethernet IP, and Modbus TCP.
6. What degree of protection is specified for 6ES7141-6BH00-0BB0?
The degree of protection is IP67 / IP69K.
