Ordering this product
Check the full part number and required version against your equipment. Add any electrical or connection requirements when contacting us.
Product information
SIMATIC ET 200SP TM ECC PL ST load controller (Part number: 6FE1242-6TM20-0BB1) supports conductive charging of electric vehicles according to DIN SPEC 70121 / ISO15118 for charge operating mode 4.
Detailed Parameters
Charge standard:DIN SPEC 70121 / ISO15118
Charge operating mode:4
Charge method:Conductive charging of electric vehicles
Operating temperature:-30 °C to 60 °C
Control Pilot:1x Control Pilot including Powerline Green Phy
Plug Present / Proximity Pilot:1x Plug Present / Proximity Pilot
Digital Out TRIP:1x Digital Out TRIP function as open collector
Digital Out (DQ P):1x Digital Out (DQ P) as open collector
Suitable BU types:BU type BU20-P12+A0+4B or BU type BU20-P12+A4+0B
Engineering Context
The TM ECC PL ST load controller is used for conductive charging of electric vehicles according to DIN SPEC 70121 / ISO15118 with charge operating mode 4.
The module provides 1x Control Pilot including Powerline Green Phy and 1x Plug Present / Proximity Pilot.
The TRIP and DQ P digital outputs are configured as open collector signals.
FAQ
1. What standard and charge operating mode does the 6FE1242-6TM20-0BB1 support?
It supports conductive charging according to DIN SPEC 70121 / ISO15118 in charge operating mode 4.
2. What is the operating temperature range for 6FE1242-6TM20-0BB1?
The specified temperature range is -30 °C to 60 °C.
3. Which signal outputs are included on this TM ECC PL ST load controller?
It includes 1x Control Pilot including Powerline Green Phy, 1x Plug Present / Proximity Pilot, 1x Digital Out TRIP as open collector, and 1x Digital Out (DQ P) as open collector.
4. Which BU types are suitable for use with 6FE1242-6TM20-0BB1?
It is suitable for BU type BU20-P12+A0+4B or BU type BU20-P12+A4+0B.
