Ordering this product
Check the full part number and required version against your equipment. Add any electrical or connection requirements when contacting us.
Product information
SIPLUS ET 200SP WP321, based on 7MH4138-6AA00-0BA0, part number 6AG1138-6AA00-2BA8, is designed as an electronic weighing system with 1 channel for SIMATIC ET200SP load cells DMS full bridges (1-4 mV/V) and an RS485 interface for SIWATOOL or remote display.
Detailed Parameters
Conformal coating:With conformal coating
Operating temperature range:-40…+60 °C
Electronic weighing system channel count:1 channel
Load cell type:DMS full bridges
Load cell signal level:1-4 mV/V
Interface:RS485
Connection options:For SIWATOOL or remote display
SIPLU S ET 200SP WP321 basis:Based on 7MH4138-6AA00-0BA0
Suitable for BU type:BU type A0
Engineering Context
SIPLUS ET 200SP WP321 is an electronic weighing system with 1 channel for the connection of load cells DMS full bridges (1-4 mV/V) for SIMATIC ET200SP.
The product provides an RS485 interface for SIWATOOL or remote display depending on system configuration.
With conformal coating, the module is specified for an operating temperature range of -40…+60 °C.
FAQ
1. What is the SIPLUS ET 200SP WP321 channel count for electronic weighing?
It is specified as an electronic weighing system with 1 channel.
2. Which load cell type and signal level can be connected?
It is designed for load cells DMS full bridges with 1-4 mV/V.
3. Which RS485 use cases are supported?
The RS485 interface is specified for SIWATOOL or remote display.
4. For which SIMATIC ET200SP BU type is it suitable?
It is suitable for BU type A0.
5. What is the operating temperature range?
The specified range is -40…+60 °C.
6. Is conformal coating included?
Yes, it is specified with conformal coating.
