Ordering this product
Check the full part number and required version against your equipment. Add any electrical or connection requirements when contacting us.
Product information
SIMATIC S7-300 CPU 315T-3 PN/DP for PLC and technology tasks; part number 6ES7315-7TJ10-0AB0.
Detailed Parameters
Product family:SIMATIC S7-300
Product designation:CPU 315T-3 PN/DP
Intended function:Central processing unit for PLC and technology tasks
Work memory:384 KB
1st interface:MPI/DP
1st interface data rate:12 Mbps
2nd interface:DP (drive)
3rd interface:Ethernet PROFINET
3rd interface switch:2-port switch
Integrated I/O:for technology
Front connector:1x 40-pole
Required memory card:Micro Memory Card min. 8 MB
Engineering Context
The CPU 315T-3 PN/DP is designed as a central processing unit for PLC and technology tasks within SIMATIC S7-300 configurations.
The interface set includes MPI/DP (12 Mbps), DP (drive), and Ethernet PROFINET with a 2-port switch for system connectivity.
The module provides integrated I/O for technology and requires a front connector and a Micro Memory Card min. 8 MB.
FAQ
1. What is the part number and product family of the CPU?
The part number is 6ES7315-7TJ10-0AB0 and the product family is SIMATIC S7-300.
2. Which CPU designation is included in this order?
The CPU designation is CPU 315T-3 PN/DP.
3. What is the CPU intended function for?
It is a central processing unit for PLC and technology tasks.
4. What work memory capacity is specified?
The CPU has 384 KB work memory.
5. Which interfaces are specified for this CPU?
The CPU includes a 1st interface MPI/DP (12 Mbps), a 2nd interface DP (drive), and a 3rd interface Ethernet PROFINET with 2-port switch.
6. What connection and memory card requirements are specified?
It uses a front connector (1x 40-pole) and requires a Micro Memory Card min. 8 MB.
