Ordering this product
Check the full part number and required version against your equipment. Add any electrical or connection requirements when contacting us.
Product information
SIPLUS G120 PM240-2 (part number 6AG1210-1PE26-2UL0) is designed for 380-480 V 3 AC 47-63 Hz operation with an integrated braking chopper and conformal coating, unfiltered design and IP20 degree of protection (without CU and operating unit).
Detailed Parameters
Part Number:6AG1210-1PE26-2UL0
Based on:6SL3210-1PE26-0UL0
Product Family:SIPLUS G120
Variant:PM240-2
Design:Integrated braking chopper; unfiltered; conformal coating
FSF design:FSF design
Degree of Protection:IP20
Operating Conditions:without CU and operating unit
Operating Temperature Range:-20…+50 °C
Supply Voltage:380-480 V 3 AC
Voltage Tolerance:+10/-20%
Supply Frequency:47-63 Hz
Rated Power (based on overload definitions):30 kW
High overload power:22 kW at 200% (3 s), 150% (57 s), 100% (240 s)
Low overload power:30 kW at 150% (3 s), 110% (57 s), 100% (240 s)
Dimensions:472x200x237 (HxWxD)
Release condition:operating unit released as of CU FW version V4.7 HF8
Engineering Context
SIPLUS G120 PM240-2 is referenced as being based on 6SL3210-1PE26-0UL0 with conformal coating.
The device is specified with an integrated braking chopper for 380-480 V 3 AC systems operating at 47-63 Hz with +10/-20% voltage tolerance.
Overload behavior is specified as high overload and low overload power levels with defined time ratings.
FAQ
1. What is the product family and designation for part number 6AG1210-1PE26-2UL0?
SIPLUS G120 PM240-2.
2. What is the supply voltage and frequency range specified?
380-480 V 3 AC with 47-63 Hz.
3. What is the integrated braking chopper configuration described for this product?
The specification includes an integrated braking chopper.
4. What is the degree of protection stated?
IP20 (without CU and operating unit).
5. What overload ratings are provided for high overload and low overload?
High overload: 22 kW at 200% (3 s), 150% (57 s), 100% (240 s); Low overload: 30 kW at 150% (3 s), 110% (57 s), 100% (240 s).
6. What operating temperature range is specified?
-20…+50 °C.
7. Is the unit filtered or unfiltered per the provided information?
Unfiltered.
8. What is the stated release condition regarding CU firmware?
Operating unit released as of CU FW version V4.7 HF8.
